Horizontal Directional Drillingon the Wirral and nationwide
Steered bores for ducts and pipes under roads, verges, driveways, watercourses and live services, without open cutting the route. Light Speed Utilities Ltd is a family run company with over 25 years in the drilling industry, and we dig and shore the launch and reception pits ourselves, so one contractor runs the job from the pilot bore to the pullback.
What the work includes
Pilot bore and tracking
The drill head is steered from the launch pit along the planned line and depth, and tracked from the surface so the bore stays clear of the services already in the ground.
Reaming and pullback
Once the pilot bore reaches the reception pit, the hole is opened up with a reamer and the duct or pipe is pulled back through in one length.
Launch and reception pits
The entry and exit pits are dug, shored with frames and sheet piles where the depth or the ground needs it, and kept safe for the drill string. See launch and reception pits.
Crossings without open cut
Roads, junctions, verges, hedgerows and watercourses are crossed from pit to pit, so traffic keeps moving and the ground between the pits is left as it was.
Photos from site




Video from site, directional drilling.
Frequently asked questions
What is horizontal directional drilling?
A trenchless way of installing ducts and pipes. A steered drill head bores a pilot hole from a launch pit to a reception pit along a planned line, the hole is opened up with a reamer, and the duct or pipe is pulled back through. Only the two pits are dug, so the road, verge or watercourse between them is left undisturbed.
When is directional drilling better than open trenching?
When the route crosses something that is expensive or disruptive to dig up: a busy road or junction, a driveway, a hedgerow, a watercourse or a run of existing services. Drilling avoids lane closures and long reinstatements, and on many crossings it is quicker overall.
Do you dig the launch and reception pits as well?
Yes. We dig, shore and manage the pits ourselves, and backfill and reinstate them when the duct or pipe is in. The pits and the bore are run by the same company, so there is no handover between contractors.
Which utilities do you drill for?
All of them: water, gas, electric and telecoms. The method is the same, and the duct or pipe, its depth and its separation from other services are set by the specification for each job.
How do I get a price for a bore?
Send us the route, the length, what is going in and roughly when, with any drawings or service plans you have. We will come back with a price and a programme.
Areas we cover
Horizontal Directional Drilling from our base on the Wirral, across Merseyside, Cheshire, Greater Manchester and North Wales, and nationwide.
Other services

Utility and Civils
Excavation, duct and cable installation, chambers and cabinet bases for utility networks.
- Ducting
- Cable laying
- Chambers and cabinets

Reinstatement
Trenches, pits and excavations backfilled and resurfaced in carriageways, footways and verges.
- Carriageway
- Footway
- Verges

Launch and Reception Pits
Entry and exit pits dug, shored and kept safe for the drill string to enter and exit.
- Trench shoring
- Sheet piling
- Entry and exit pits

Water Mains and Services
Water mains and service pipes drilled or trenched in, with the pits and reinstatement included.
- Mains
- Service pipes
- Crossings
Planning a directional drilling job?
Send us the route and we will come back with a price and a programme.